top of page

The Wingfield 3 point EconoDrag is available in 4' 9" - 7' 2" widths and is 5' in length. It utilizes a fully-encompassing, box-tube frame to offer total control over the harrow. With the three point frame, you can back into corners, shake out loose material, control the number/pressure of the tines on the ground, and easily transport the harrow. Plus, you can quickly change the harrow aggressiveness with no tools. The three point harrow is also Cat #1 quick-hitch enabled as standard equipment.

This unit can perform a wide variety of jobs on a small acreage: aerate and thatch, maintain a gravel driveway, reseed a yard, break up manure in a pasture, groom a riding arena, prepare a seedbed for a garden, incorporate fertilizer/chemicals, level off behind heavy-equipment, and much more! This versatility makes it one of the handiest pieces of equipment you can own.


Also, if your tractor is in use or out of action, the optional chain and clevis allows the chain harrow to be pulled by an ATV or large garden tractor.

You won't find a better small 3pt chain harrow for sale on the market today because of these features:

  • A high-carbon, DRAWN, spring-steel harrow tine that can outlast the competition by up to three times!

  • Harrow tines are computer bent to ensure even wear and consistent performance

  • Rings in lieu of hooks to prevent unhooking, binding, and premature wear

  • Box-tube framework encompasses the entire harrow, and is built heavy enough to withstand harsh conditions

  • The 3 point Lift is setup for a Cat #1 tractor and is quick-hitch enabled

  • Harrow can be pulled in the aggressive mode (tines standing up), less aggressive mode (tines laying flat), upside down (tines pointing in the air), or a combination between the front and rear section - rough up in aggressive mode with the front mat, and smooth out with the rear mat either turned backwards (less aggressive mode) or upside down (tines pointing up in the air)

  • The harrow mat attaches to the frame with 4 chains - this allows the operator the ability to quickly switch from the aggressive to less aggressive modes. Just release the chains, leave the harrow mat on the ground, drive your tractor with frame around to the other end, re-attach the chains, and drive off in the other direction

  • Entire unit can be broken down into 3 pieces with no tools required, and can also fit in the bed of a pickup truck

  • Made in USA

Though it may be small, the Wingfield 3 point EconoDrag chain harrow is built to tackle numerous large jobs and last through them.

Remember: You control the harrow on a frame, a drag harrow controls you.


  • Width: 4' 9" - 7' 2"

  • Length/Depth: 5' 0"

  • Weight: 298 lbs. - 369 lbs.

  • Frame Beams: 2 1/2” x 2 1/2” x 1/8” x 54” or 72" Beam

  • Frame Verticals: 1” x 2” x 1/8” x 60” Vertical support beam

  • Hitch: Cat #1, quick-hitch ready

  • Drawbar: 49" - 76" wide - 1 1/4" Schedule 80 drawbar pipe (front and rear)

  • Optional Chain/Clevis: 6' long - 5/0 high-test chain, clevis accepts a 1/2" pin

  • Tine: Computer bent 1/2" diameter high-carbon, drawn spring steel tine

  • Number of tines: 44 - 68

  • Points of contact: 88 - 136

Sizes, Models & Pricing:

SIZE: 4'9" W X 5' L




SIZE: 5'7" W X 5' L




SIZE: 6'5" W X 5' L




SIZE: 7'2" W X 5' L




Three Point EconoDrag chain harrow aerating a pasture
Three point EconoDrag chain harrow
Three Point EconoDrag chain harrow dragging a pasture

Wingfield American Harrow

American Steel. American Labor. American Quality.

bottom of page